High Quality Galvanised Steel Suppliers – Electrical Cross Arm – X.Y. Tower
High Quality Galvanised Steel Suppliers – Electrical Cross Arm – X.Y. Tower Detail:
Hot Dip Galvanized Electrial Cross Arm
various production / whosale models / support customization
ELECTRICAL CROSS ARM
Straight cross arm: only considered in normal without bolt, under vertical load and horizontal load of the wire; Tension cross arm: conductor under vertical and horizontal load, the poor will also bear wire pulling force;
Angle of cross arm, except under vertical and horizontal load of the wire will also bear big unilateral wire tension. According to the force of the cross arm, the straight rod or 15 Angle pole adopts single cross arm, under the corner at the corner of 15 degrees above rod, tension rod, terminal rod, branch rod with double cross arm. Cross arm general installation from the peak of 300 mm, straight cross arm should be installed in the side, branch Angle pole, pole terminal, rod cross arm should be installed in the thread side.
PRODUCT SHOW
DESIGN SPECIFICATION
| Type | Galvanized steel cross arm |
| Suit for | Electricity distribution |
|
Material |
Usually Q345B/A572,minimum yield strength>=345n/mm2,Q235B/A36,minimum yield strength>=235n/mm2,As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52 |
| Torlance of dimenstion | -0.02 |
| Power | 10 KV ~550 KV |
| Safety Factor | Safety factor for conducting wine : 8 |
| Design Load in Kg | 300~ 1000 Kg appliced to 50cm from the to pole |
| Surface treatment | Hot dip galvanized Following ASTM A 123 or any other standard by client required. |
| Wind Speed | 160 Km/Hour . 30 m /s |
| Minimum yield strength | 355 mpa |
| Minimum ultimate tensile strength | 490 mpa |
| Max ultimate tensile strength | 620 mpa |
| Standard | ISO 9001 |
| Length of per section | Within 14m once forming without slip joint |
| Thickness | 1 mm to 30 mm |
| Production Process | Rew material test → Cuttingj →Molding or bending →Welidng (longitudinal )→Dimension verify→Flange welding →Hole drilling |
| →Calibration → Deburr→Galvanization or powder coating ,painting →Recalibration →Thread →Packages | |
| Joint of Poles | Insert mode,innerflange mode,face to face joint mode . |
Product detail pictures:
Related Product Guide:
From the past few years, our firm absorbed and digested sophisticated technologies equally at home and abroad. Meanwhile, our organization staffs a group of experts devoted into the growth of High Quality Galvanised Steel Suppliers – Electrical Cross Arm – X.Y. Tower , The product will supply to all over the world, such as: Greece, United Arab emirates, Washington, We expect to provide products and services to more users in global aftermarket markets; we launched our global branding strategy by providing our excellent products all over the world by virtue of our well reputed partners letting global users keep pace with technology innovation and achievements with us.
By James Brown from Kazakhstan - 2017.01.28 19:59
Speaking of this cooperation with the Chinese manufacturer, I just want to say"well dodne", we are very satisfied.
By Genevieve from Netherlands - 2017.12.09 14:01
