• bg1

500kV Transposition Tower

Tower Type: Transposition Tower

Voltage: 500kv

Material: Q235, Q355, Q420

Welding: AWS D1.1

Hot dip galvanizing: ASTM A123

Certificate: GB/T19001-2016/ISO 9001:2015 

Application: Electric Power Transmission Line


Product Detail

Product Tags

双回换位塔

Transposition Tower Principle

In order to reduce the asymmetry of current and voltage during normal operation of power system, and limit the influence of power transmission circuit on communication line.

Except for the regular triangle arrangement, the distance between the three wires is not equal. The reactance of the conductor depends on the distance between lines and the radius of the conductor. Therefore, if the conductor is not transposed, the three-phase impedance is unbalanced. The longer the line is, the more serious the imbalance is.

Therefore, unbalanced voltage and current will be generated, which will have a negative impact on the operation of generator and radio communication. The code for design of power transmission lines stipulates that "in the power network with directly grounded neutral point, the power transmission lines with a length of more than 100km shall be transposed". Conductor transposition is generally carried out in transposition tower.

Products Available at XY Towers 

●Telecommunication Towers

●Steel Tube Pole

●Electric Substation structures

Angle Steel Tower 

Item Specifics

 

Height 500kV, height–according to the parameters offered by customer
Wind pressure 0~1kN/m2 (Chinese standard, other country’s standard may change based on it)
Wind speed 0~180km/h (American standard 3s gust)
Foundation type Independent foundation/Raft foundation/Pile foundation
Environment condition Soft ground/Mountain groud
Type Three-legged/Four-legged
Quality system GB/T19001-2016/ISO 9001:2015
Design standard Chinese relative regulation/American standard G/American standard F
Material  Q235/Q345/Q390/Q420/Q460/GR65
Galvanized Hot dip galvanization (86μm/65μm)
Connection structure Bolt
Lifetime 30years,according to installing environment

Package & Shipment

     Every piece of our products is coded according to the detail drawing. Every code will be put a steel seal on each piece. According to the code, clients will clearly know a single piece belong to which type and segments.

    All the pieces are properly numbered and packaged through the drawing which could guarantee no single piece missing and easily to be installed.

 
2021年新项目发货
2
600 400-1
600 400-6

  • Previous:
  • Next:

  • Send your message to us:

    Write your message here and send it to us

    Send your message to us:

    Write your message here and send it to us