500kV Termianl Tower
Products Available at XY Towers
●Telecommunication Towers
●Steel Tube Pole
●Electric Substation structures
●Angle Steel Tower
Product Introduction
Transmission line angle steel lattice tower is called angle tower for short, it‘s for electricity transmission and distribution，and by their shapes they are generally divided into five types: glass type, cathead type, fonts on type , dry fonts type and bucket type. By the uses, they can be divided into: tension tower, straight line tower, angle tower, transposition tower (to replace the position of wire phase), terminal tower and crossing tower, etc.
Features
1. Various towers are all lattice structure. Bars are composed of single equilateral angle steel or combination of angle steel.
2. The materials are generally Q235(A3F), Q345(16Mn) and Q420 The connection between the bars are crude bolts.
3. Hot dip galvanized anti-corrosion. Very convenient for transportation and construction erection.
4. To the towers, which vertical distance from horizontal ground to first-floor crossarm hang point is below 60 meters, we set foot nails on one of main legs to facilitate the construction workers to climb onto the tower for operation.
Item Specifics
| Height | 500kV, height–according to the parameters offered by customer |
| Wind pressure | 0~1kN/m2 (Chinese standard, other country’s standard may change based on it) |
| Wind speed | 0~180km/h (American standard 3s gust) |
| Foundation type | Independent foundation/Raft foundation/Pile foundation |
| Environment condition | Soft ground/Mountain groud |
| Type | Three-legged/Four-legged |
| Quality system | GB/T19001-2016/ISO 9001:2015 |
| Design standard | Chinese relative regulation/American standard G/American standard F |
| Material | Q235/Q345/Q390/Q420/Q460/GR65 |
| Galvanized | Hot dip galvanization (86μm/65μm) |
| Connection structure | Bolt |
| Lifetime | 30years,according to installing environment |
Package & Shipment
Every piece of our products is coded according to the detail drawing. Every code will be put a steel seal on each piece. According to the code, clients will clearly know a single piece belong to which type and segments.
All the pieces are properly numbered and packaged through the drawing which could guarantee no single piece missing and easily to be installed.
